Click on an icon to visit our other websites:

UPS power inverters

A UPS unit, which stands for Uninterruptible Power Supply, is a very special kind of power inverter and battery charger.

A UPS works much the same way as our power inverter and battery charger combination systems. The UPS is designed to be connected or inserted in between the source of power (either grid-fed electricity, solar or generator power) and the load it feeds and protects.

When there is a power failure, the UPS switches over from its normal power source to its own power source almost instantaneously and automatically.

Although UPS systems are not limited to a specific kind or type of electrical equipment, UPS are more often used to protect appliances like computers, telecommunications facilities and medical life support and intensive care monitoring equipment where any unexpected power interruption or failure could have life threatening consequences, or business disruption, data and/or income loss.

UPS units come in all shapes and sizes, ranging from small units which can back up a single PC with a TFT or LCD screen (about 400VA) to units so large that they can power an entire office block(many megawatts)

The much larger UPS units will often operate together with back up generators and even solar power systems.

Two general categories are used to classify most modern UPS systems. These are on-line and off-line UPS systems.

An on-line UPS always provides the power to its load from its own internal energy supply, which in turn gets continuously charged by the input power (either grid-fed electricity or generator)

An off-line or standby UPS allows the load to get its power directly from the input power source, and the back up power circuits only get switched on when the input power source fails.

A true uninterruptible unit is the double conversion on-line UPS system.

In these systems, the input power source – AC goes to the back up batteries (power storage) and then is converted back to AC power through a built in true sine wave power inverter.

This form of UPS provides the cleanest power possible for the specific load it is supplying.

Below is a comprehensive list of various kinds and sizes of UPS systems:

Line interactive UPS systems

	T1X Series line interactive UPS system
	Reliable Cost effective Surge protection Line interactive Overload protection USB communications Microprocessor controlled
	Spec Sheets
	T1X Series line interactive UPS system. (650VA-2kVA)

	AEC T1 Series line interactive UPS system
	Reliable Surge protection Line interactive Overload protection RS232 or USB communications Microprocessor controlled
	Spec Sheets
	AEC T1 Series line interactive UPS system. (500VA-1kVA)

	AEC T2 Series line interactive UPS system
	Pure sine wave Reliable Surge protection Line interactive Overload protection RS232 or USB communications Microprocessor controlled
	The T2 line interactive series benefits from the latest MCU technology, and now offers even greater volume for money. The T2 is aimed at users that require protection from line voltage fluctuations and require a reliable constant voltage source.
	Spec Sheets
	AEC T2 Series line interactive UPS system. (1kVA - 3kVA)

Online UPS systems

	AEC T3 Series online double conversion UPS system.
	Parallel redundancy as standard (6kVA & 10kVA) High protection rating Compact size Overload protection RS232, USB or SNMP communications (OPTIONAL) Microprocessor controlled
	The T3 Series is a physically small on-line UPS but retains all the features that have made the AEC range of online UPS systems so popular.
	External charger available for 4, 8 ,12, 24, 48 Hour runtimes
	Spec Sheets
	AEC T3 Series online double conversion UPS system. (1kVA - 10kVA)
	AEC T3T Series with ISOLATION transformer

	AEC T4 3/1 Series online double conversion UPS
	Parallel redundancy as standard High protection rating Compact size Overload protection RS232, USB or SNMP communications (OPTIONAL) Microprocessor controlled
	The T4 Series is a physically small on-line UPS but retains all the features that have made the AEC range of online UPS systems so popular
	External charger available for 4, 8 ,12, 24, 48 Hour runtimes
	Spec Sheets
	AEC T4 3/1 Series online double conversion UPS system. (10kVA - 20kVA)
	AEC T3T Series with ISOLATION transformer

	AEC T5 3/3 online UPS system
	Transformer based high protection Overload protection SNMP communications (OPTIONAL) Microprocessor controlled
	With even greater demand being made on valuable floor space, many IT managers are moving towards computer rack solutions rather than conventional floor standing units.
	Spec Sheets
	AEC T5 3/3 online UPS system (10kVA-160kVA)
	AEC T2000 online UPS system (160kVA - 2MVA)

	AEC T6 Online UPS systems
	The AEC Star T6 series UPS is an on-lne double conversion three phase UPS with a fully digitised intelligent galvanic isolation design. Single unit ratings of up to 1MVA are available and parallel capability is also available. The UPS can also be cusomised for various input voltages allowing them to be used in various applications (e.g. mining).
	Spec Sheets
	AEC T6 Online UPS systems (10kVA -1MVA)

Rack Mounted UPS Systems

	Hot swappable online UPS system
	Power+ is a state-of-the-art modular UPS system based on the true on-line battery topology. The Power+’s modular design makes scalability simple; its high power density provides the benefits of a small footprint and low heat dissipation. The Power+’s rich management and communication capabilities include remote monitoring and control over the Internet or via cellphone. Its hybrid static switch ensures high reliability and compliance with IEC standards.
	Spec Sheets
	Hot swappable online UPS system

	AEC T3R Rack mount online UPS system
	High protection rating Compact size Overload protection RS232, USB or SNMP communications
	With even greater demand being made on valuable floor space, many IT managers are moving towards computer rack solutions rather than conventional floor standing units.
	Spec Sheets
	AEC T3R Rack mount online UPS system (1kVA-3kVA)

Download our UPS price list here